Airite,
Inc. is proud to be South Carolina's authorized
distributor for Aerzen USA, manufacturer
of the highest quality positive displacement
blower packages.
Patented
3-lobe Positive Displacement Blowers Type
GM
Patented 3-lobe blower stage with integrated
pulsation cancellation for inlet flows from
20cfn (30m3/h) to 38, 000 cfm (65,000 m3h)
and, depending on the sizes, pressures up
to 15 psi (1000 mbar).
Aerzen
Positive Displacement Blower Packages DELTA
BLOWERS
Complete packages designed, built, supplied
and supported by Aerzen Modular design with
Aerzen GM-series blower from 20 cfm (30
,m3/h) up to 8500 cfm (14,400 m3/h) and
pressures up to 15 psi (1,000 mbar) / 10
psi (700 mbar) depending on the blower sizes
or exhauster for 15"Hg (500 mbar) vacuum.
Also available for gas applications.
Aerzen
Process Gas Blowers, GQ Series
For inlet volumes up to 53,000 cfm (90,000
m3/h) and pressure differences, depending
on the machine size, up to 22 psi (1500
mbar), these machines are especially designed
to operate on every contaminated gas streams.
Aerzen
Process Gas Blowers, GR Series
Bearing
and gear chambers are outboard and completely
separated from the gas stream by double
acting mechanical seals or purged restrictive
carbon ring seals; special designs available
to handle agressive gases. Flows to 30,000
cfm (50,000 m3/h) for up to 12 psi (800
mbar) differential pressure.
Aerzen
Truck Blowers GM Series
Manufactured in two-and three-lobe design.
Flows to 1300 cfm (2250 m3/h) and pressures
to 17.5 psig (1200 mbar) and 15"Hg
(500 mbar) vacuum.
Aerzen
Pressure Boosters, GM-cz Series
Aerzen pressure boosters are capable of
differential pressures up to 30 psi (2 bar)
and are equipped with a 360 psi pressure
rated casing (PN 25); inlet flows to 3,500
cfm (6,000 m3/h).
Aerzen
Vacuum Pumps with Pre-inlet Cooling
The pre-inlet cooling allows to operate
continously at a higher vacuum than standard
blowers: flow up to 9,500 cfm and 80% or
24"Hg vacuum and up to 30,000 cfm (50,000
m3/h) at 60% or 18"Hg vacuum.
